Flooring

What are Epoxy Floor Covering Types?
Epoxy, a type of chemical resin, is suitable for use on various surfaces due to its high chemical resistance. It is applied as a liquid and after drying, it becomes a surface resistant to abrasion, moisture, water, and acid. It is preferred because it is easy to clean, antibacterial, and has a wide color range. Available in varieties such as transparent, anti-static, and orange peel.

What are PVC Floor Covering Types?
PVC and vinyl, which are among the Floor Covering Types, have the same meaning. PVC, a synthetic type of plastic prepared from ethylene and chlorine, has a lifespan of 15-20 years. Vinyl is produced in two types: homogeneous and heterogeneous, and in two forms: roll and tile. It is a flexible and durable material. Its ability to reflect ground imperfections is low. It is hygienic as it has a low liquid permeability rate. It is widely used in hospitals, offices, and schools.

WHAT IS HOMOGENEOUS VINYL?
The color range of single-layer homogeneous vinyl is wide, but since there is no design layer, no pattern can be given. Thanks to its homogeneity, situations such as abrasion are not encountered. It requires polishing after 5-6 years of use.

HETEROGENEOUS VINYL?
There is PVC foam at the bottom, a pattern layer with the design in the middle, and a protection layer at the top. The protection layer may wear off over time.

WHAT ARE LUXURY VINYL TILES (LVT)?
LVT produced as a tile sheet is preferred for areas without screed or smooth flooring. It stands for luxury vinyl. It has more variety of colors and textures.

What are Linoleum Floor Covering Types?
Linoleum, formerly known as linoleum, contains 96% natural products such as linseed oil, tree resin, sawdust flour, textile layer, and limestone, and 4% artificial materials such as polyurethane. Since it is a natural material, it is generally preferred in schools. It is produced as a 200cm wide roll. It is not resistant to moisture and heat. It is harder to clean and a harder material compared to vinyl. This creates difficulty in implementation. Skirting cannot be made from the same material. It is recommended to use aluminum or PVC in turns.

What are Parquet Floor Covering Types?
Wood-based products among the Floor Covering Types are listed under this group.

WHAT IS LAMINATE FLOORING?
Laminate flooring has a four-layer material structure. There is balance paper in the bottom layer, MDF (medium-density fiberboard) or HDF (high-density fiberboard) in the second layer, high-resolution parquet photo in the third layer, and a polish layer in the last layer. Since there are many types of printing, it is easy to find the desired pattern and color, but it has an artificial appearance. In case of possible scratches or breaks, it must be renewed and repair is not possible.

WHAT IS LAMINATED PARQUET?
Unlike laminate flooring, the layers of laminated flooring consist of natural materials and are healthy. Although laminate flooring does not have high abrasion resistance, it is possible to repair it. It breathes thanks to its porous structure.

WHAT IS SOLID PARQUET?
Solid parquet is created by simply shaping the wood without interfering with its structure. It is a long-lasting, natural, healthy, and aesthetic material. It does not lose its appearance even if it is polished many times. Since it is natural, care must be taken when using it.

What are Rubber Floor Covering Types?
This flooring material is produced using rubber dough, filler, and pigment; It is suitable for outdoor use as it is suitable for outdoor conditions. It is a material that has high abrasion resistance, is resistant to chemicals and water, and helps with sound insulation. It is widely used in parks, walking tracks, tennis courts, gyms, and garages. Thanks to its dirt-repellent, hygienic structure, it can be preferred in nurseries and school gardens.

What are Polyurethane Floor Covering Types?
Polyurethane, which is a durable and flexible material, can be applied to concrete and steel surfaces and has high wear resistance, so it is used extensively in parking lots, gyms, markets, shopping malls, and hospitals. Although it has a shorter history compared to rubber, it is more durable. Patterns and guiding lines can be given, and production can be done in any color. It is a material that can be easily cleaned and requires little maintenance. It does not cause dislocation or burning after application. However, there is research that polyurethane is a toxic material and carcinogenic when exposed to it for a long time.

What are Tile Floor Covering Types?
Flat-surfaced pieces whose length and width are greater than their thickness are called tiles. Tiles can be created from a variety of materials. The fact that it can also be applied to vertical surfaces makes it preferred in places where a monolithic appearance is required.

WHAT IS CERAMIC TILE?
It consists of a mixture of ceramics, clay sand, and other natural materials. Ceramic tiles, which have a higher brittleness rate because they are fired at lower temperatures than other tiles, have glaze only on their surfaces. To prevent breakage, professional work should be done on the application. There are many color options, it is possible to achieve the desired color.

WHAT IS PORCELAIN TILE?
The quality of the clay in porcelain tiles is higher than that in ceramic tiles. For this reason, the water absorption rate is less than ceramic tiles. Porcelain tiles baked at very high temperatures also have high durability. For this reason, it is widely used outdoors. It is similar to natural stones in many respects, with its low wear rate and water resistance. There is a glaze on its entire body, which makes it easy to clean.

What is Concrete Wiping?
A new surface is obtained by sanding the existing concrete with diamond particle pads. This method provides a long-lasting, durable, and functional solution. It is possible to choose the mattress and gloss level of the surface. During application; The old layer is cleaned, grinding is done to obtain a flat surface, the ground is nourished using a silicate-based cure and finally polishing is done with the help of pads. At the end of the process, a durable material with low wear and tear is obtained with a sustainable approach. In addition to being preferred in places with an industrial look, it is also used in markets and warehouses.